[Guide] Setup Guide for Ventrilo!

Welcome to the Ventrilo Guide!
By: McDean_Prevails

1) To begin speaking to other Guild Members, Simply follow these steps below:

Download the program from these links:
Windows (32bit)
Windows (64bit)
Mac OSX 10.3 or higher (32bit)
Linux (In development)

Files are around 3MB's big.

2) Once Downloaded, Double click the file and 'Run' it. Installing will only take 1min. For more information please click Here where you can find installing Guides.



3) For New Users, you must Create a 'User Name', do this by clicking on the 1st arrow -> at the top.



4) Click on 'New' and enter in a name. Leave all other fields blank. Finish by clicking 'OK'

5) The server that =OHC= uses is 'Ausgamers Vent' at www.ausgamers.com
You can add this by clicking on the 2nd arrow down -> on the right which brings up our next screen:



6) Start off by clicking 'New' and typing in 'Ausgamers Vent'. Then enter in the below information! Make sure you have both the Hostname and Port Number are correct!
Hostname or IP: 203.220.0.236
Port Number: 3795
Leave other fields as they were! You will not connect if this information is incorrect!

And you are now done, you can change some settings in 'Setup' if you would like. Just click 'Connect' before you load up Battlefield 2 and connecting to OUR channel under 'Clan Channels' (We should be near the top of the list):
Channel Name: -OHC- Headquarters
Password: LOLUNIT (All in Caps!)


Thanks for your co-operation
Enjoy using the Forum.
=OHC= Elite Forum Developer